High strength corrosion resistant TMT re-bars. Typically used in construction in coastal areas, areas with high salinity in the air, industrial areas, construction of marine structures and in areas with high acid content in the air.
| Parameter | Fe 500 D CRS as per IS 1786-2008 |
JSW Neosteel 500 D CRS |
Fe 550 D CRS as per IS 1786-2008 |
JSW Neosteel 550 D CRS |
Fe 600 CRS as pe IS 1786-2008 |
JSW Neosteel 600 CRS |
|
 Chemical Composition |
% C (max) | 0.15 | 0.14 | 0.15 | 0.15 | 0.15 | 0.15 |
| % S (max) | 0.040 | 0.030 | 0.04 | 0.03 | 0.04 | 0.04 | |
| % P (max) | 0.12 | 0.10 | 0.12 | 0.08 | 0.12 | 0.08 | |
| CE (max) | 0.50 | 0.50 | 0.53 | 0.45 | 0.53 | 0.45 | |
 Mechanical Properties |
Yield Strength N/mm2 (min) | 500 | 530 | 550 | 570 | 600 | 620 |
| Tensile Strength N/mm2 (min) | 565 | 600 | 585 | 630 | 660 | 670 | |
| UTS / YS ratio | 1.10 | 1.10 | 1.08 | 1.1 | 1.06 | 1.08 | |
| % elongation (min) | 16 | 16 | 14.5 | 16 | 10 | 12 | |
| % T EL (min) | 5 | 5 |
 Bend properties |
Mandrel diameter upto and including 20 mm (max) | 3D | 3D | 4d | 4d | 5d | 5d |
| Mandrel diameter over 20 mm (max) | 4D | 4D | 5d | 5d | 6d | 6d |
 Re-bend properties |
Mandrel diameter upto and including 10 mm (max) | 4D | 4D | 5d | 5d | 6d | 6d |
| Mandrel diameter over 10 mm (max) | 6D | 6D | 6d | 6d | 8d | 8d |
Find out more about our value added solutions. Connect Now!
